NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

1. Remove the AC Adapter from the notebook and turn the system over on a flat stable surface.
2. Locate the battery removal clips as shown in Figure 1. Figure 1

Figure 1

3. Move the left clip to the Unlock position as shown in Figure 2. The Right clip is spring loaded to remain in the Locked position automatically. Figure 2

Figure 2

4. Once the left clip is pushed to the Unlock position, push the right clip to the Unlock position and slide the battery out of the notebook.
5. To put the battery back in to the system. Align the battery so that the sides (shown in Figure 3) slide into the notches on the battery compartment. (As Shown in Figure 4). Figure 3 Figure 4

Figure 3

Figure 4

6. Push the battery in, and a click sound will be heard. Slide the left battery clip to the right to lock the battery back into place.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.