NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

What you should get in your accessory package

• Bus Toaster SCSI II PCNCIA card
• SCSI install diskette(1)
• SCSI PCMCIA to SCSI II adapter
• Cable for PCMCIA card to SCSI connector
• Registration card
• Quick start sheet
• SCSI II User’s manual

Important:

Do not Install any disks if you are running Windows 95!

The diskettes included with your Bus Toaster are for DOS 6.xx and Windows 3.x

DOS/Windows 3.x:

DOS and Windows 3.x require Card services and Bus Toaster drivers. You will need to load Card Soft from the PCMCIA diskette you received with your WinBook if it is not already loaded. Load the Bus Toaster drivers from its install diskette by clicking on Run and typing a:\setup and then pressing Enter. Your Bus Toaster should be enabled now.

Windows 95 Install:

Boot into Windows 95 and when the system has booted to the desktop insert your Bus Toaster into your WinBook. A New hardware found message will come up followed by the message adding software. When Windows finishes you should hear two beeps telling you that your card is ready. The Bus Toaster should be ready now.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.