NOTE: You, the customer, are solely responsible for data security. WinBook strongly recommends that you perform a backup of all personal data contained on your system prior to performing this procedure. Warning: WinBook will NOT be held responsible for any data loss incurred during this process.

When using Windows 95 and trying a dial out or sending a fax you get a return error message that the connection does not answer. This could be caused by the connection timeout being set too short. To check your time out settings follow these procedures. Click on the Start button, go up to Settings, and over to Control Panel. Double click on Modems. Go to Properties, then to Connection. Make sure under connection timeout it is set to 60 seconds. Anything else and the modem may timeout before the connection is made.

Your feedback is greatly appreciated. If you have noticed any problems with this tech article, or if you feel that something is not clear enough, please E-mail our Technical Support department by clicking on the link below. Please include the Technical Article Number and the specific area that you feel is inaccurate. Thank you. 
WinBook Tech Article Feedback

Disclaimer: This information is being provided to you as a service from the Technical Support Department of WinBook Computers. It is intended to assist you in the resolution of your technical problems or questions. If you feel uncomfortable implementing any of the information or suggestions contained herein then you should e-mail the WinBook Technical Support Department. WinBook will not be held responsible for any loss of information, data or programming as a result of the use of this TechNote.